model-610

Model 610

Rolling steel door model 610 is a perennial best-seller for good reason. The standard features exceed the norm for quality and a myriad of options allow for true customization. The Model 610 is built with a standard galvanized steel curtain, or an optional stainless steel or aluminum curtain.

The standard curtain slat is the attractive C-187 curved profile, with additional slat options available in curved and flat. Finishes range from four standard colors to approximately 200 powder coat colors or matched to your specification. A host of other options — including motor operation, pass doors, exhaust ports, between-jambs mounting, cylinder locks and special usage packages — allow the 610 to be adapted to any environment.

Slat Type

C-187 SLAT

C-275 SLAT

C-600 SLAT

F-265 & FE-265 SLAT

Accessories

Electric operator (RHX®, RSX®, RMX®) or crank operation
Bottom sensing edge
Galvanized steel bottom bar angles and guides
Sloping bottom bar
Between-jambs mounting
Stainless steel or aluminum slats
High-usage package
High-wind load (FBC, TDI, DADE)
Cylinder lock
Exhaust ports
Flat slat profile (F-265)
C-600 heavy duty 6" curved slat profile
Perforated 18 ga. steel slats with 1/16" (2 mm) diameter holes on 1/16" (2 mm) centers
Fenestrated 18 ga. steel slats with uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm) on C-275 or F265 slat profiles
Fenestrated 18 ga. steel slats with uniformly spaced openings of 1" x 10" (25.4 mm x 254 mm) on F265 slat profile
PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification.
PowderGuard® Zinc and PowderGuard® Weathered finishes
Special application doors:
- Oversized doors to 1500 sq. ft. (139.4 sq. m)
- Combination doors with grilles and/or with full or partial standard, perforated or fenestrated slats
- Spark-resistant doors, craneway doors, pass doors

Colours

White

Gray

Tan

Brown

Actual door color may vary from the digital representation shown here.

Color samples are available by request.

Powder Coat Color Options

PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification. PowderGuard® Textured finish, a thicker, more scratch resistant coat, is available in 11 colors providing enhanced scratch resistance as well as aiding in hiding the dirt and blemishes that often occur in commercial environments.

Features

Standard max width:

30'4" (9246 mm)

Standard max height:

28'4" (8636 mm)

Slat profile:

C-187, C-275, F-265, F-265E, C-600

Standard mounting:

Face of wall

Finish:

Gray, tan, white or brown

Hood:

24 ga. galvanized steel

Wind load:

20 psf

Guides:

Three structural steel angles PowderGuard® weathered finish with black powder coat

Lock:

Interior slide bolt on push-up
Padlockable chain keeper on chain hoist

Bottom bar:

Extruded aluminum with weatherseal up to 15'4" (4674 mm)
Back-to-back steel angles with weatherseal more than 15'4" (>4674 mm)

Weatherseals:

Bottom bar astragal

Warranty:

24-month limited on door
3 year/20,000 cycles limited on door & operator system (when purchased together)

Curtain:

16 ga. galvanized steel up to 30'4" (9246 mm) width (F-265 only)
18 ga. galvanized steel up to 30'4" (9246 mm) width*
20 ga. galvanized steel up to 25'4" (7722 mm) width*
22 ga. galvanized steel up to 18'4" (5588 mm) width*
24 ga. galvanized steel up to 15'4" (4674 mm) width*
* not all slat profiles